Product
Specification Sheet
Acrylic Concrete Sealer
ST1040-i2
Description: A single component, top quality acrylic
polymer combined with fast evaporating solvents for use over properly prepared concrete
floors and other concrete surfaces. This product dries to a clear, colorless, abrasion and
chemical resistant film that provides a weatherproof sealer that resists sun, rain, most
acids, industrial chemicals, oil and grease.
Advantages: Single component product that is very easy to use, no mixing. It is
clear so it is easy to cut in around edges. It cost less than urethane or epoxies. It has
fairly good chemical resistance and prevents oils and chemicals from soaking into concrete
thus easy to clean.
Disadvantages: Color not available with this product, just clear, cannot hide
flaws in concrete. Not quite as chemically resistant as certain epoxies or urethane.
Usage: Provides a clear coating over concrete floors, walks, patios, etc. , that
is easy to keep lean and is very easy to apply. (Almost error proof.)
Preparation: Surface to be coated must be cured, firm, dry and clean; free of
dust, oil, grease, and wax. Loose paint, chalk, rust or scale must be removed. Any
contamination will adversely affect the performance of the coati
Application: Product can be applied by brush, roller, or sprayed. Coverage 300
to 400 square feet per gallon , depending on porosity, texture and method of application.
Apply coating only when air and surface temperature is above 50’ F.
Characteristics: - Pot life – 8 hours at 70 degrees F.
- Shelf life – I year.
- Clean up – Xylene or lacquer thinner.
- Dry time – to touch 5 to 10 minutes at 70 degrees F and 50% per cent relative
humidity. Thorough dry 25 minutes.
A single component, top quality acrylic
polymer combined with fast evaporating solvents for use over properly prepared concrete
floors and other concrete surfaces. This product dries to a clear, colorless, abrasion and
chemical resistant film that provides a weatherproof sealer that resists sun, rain, most
acids, industrial chemicals, oil and grease.
Caution: Keep away from children. Do
not take internally. If taken, contact physician. When spraying a protective mask should
be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15
minutes and seek medical attention. KEEP FROM FREEZING.
|
